Atari 2600/7800 Commodore 64 Competition Pro shaped 3D Printed Joystick Sanwa clone stick

You are looking at a custom made Atari 2600 / 7800 / Commodore 64 Joystick that is shaped as the very popular Competition Pro. (Also compatible with ATGAMES Atari Flashback systems.) This has sanwa clone joystick and button with microswitches.

I was tired of my Atari 2600 controller having issues everytime I wanted to play it that I decided to 3D print my own controller housing and get some nice microswitch buttons and sticks. I have 3D printed this in PETG as it is much much stronger than PLA. This will hold up much better than your classic Atari joysticks.

All parts on this are brand new (new stick, button and case is 3D printed). The case was 3D printed, the joystick and buttons taken out of the box and put in the case. After that the wire was soldered in and case was closed then tested for full functionality.

Due to the overwhelming response for these items I have made several more and I would like to offer to people that are looking for a better way to play their classic Atari games. These joysticks are also compatible with the Atari Flash back systems as they have a standard 9 pin connector.

Please note that these are 3D printed and not plastic molded there may be some imperfections as they are not 100% perfect.

Also please note that there is a 15 day handling time before these get mailed out. This could be sooner or it could take me the entire time to get them done. The reason for the delay is due to the fact that each side of the joystick takes 6 hours to print and I only print these when I am in my office monitoring the prints as I do not want to have this cause fires or issues with the print. Please make sure you are OK with this before purchasing, if you do not like to wait, please do not purchase.